Tillverkaren Mancraft utslagna av regnovädret Boris

Den polska tillverkaren Mancraft har drabbats hårt av regnovädret Boris som dragit fram genom flera Centraleuropeiska länder.

Deras lokaler i den polska staden Głuchołazy, nära gränsen till Tjeckien, svämmade över vid det kraftiga regnovädrets framfart vilket resulterat i att bland annat tillverkningsutrustning så väl som färdiga produkter behöver kasseras.

Nu håller de på att röja upp i lokalen och sanera så att produktionen kan komma igång igen.

För att hjälpa dem ekonomiskt har de startat en crowdfunding-insamling där de efterlyser 250 000 zł (~665 000 SEK).

Bilden ovan visar del av förödelsen och fler bilder såväl som videor finns i deras olika kanaler.

Nedanstående text hämtad från deras crowdfunding-sida:

A difficult time has come for us, full of challenges and work, so we turn to you with a big request. We hope that Mancraft Team is more than just a slogan, we believe in the airsoft community and the spirit that is in it.

As some of you know, the town where our company is located was hit by an unimaginable tragedy: THE BIGGEST FLOOD IN OUR HISTORY. Its scale was unpredictable: no one expected it to bring such losses and in such a short time. In just a few hours, a large part of the city was destroyed. A huge wave flowed through Głuchołazy in a mad current, carrying everything it encountered in its path. The element also affected our company. At the moment, we are cleaning the production halls from mud, dirt and rubbish, but we already estimate that the losses are huge. All equipment, machines, electronics, all work stations, finished parts and components were destroyed. The biggest challenge at the moment is CLEANING, DISINFECTION and DRYING of the HALLS. Everything in them has been contaminated and must be thrown away, also for epidemiological reasons. It is a laborious process, but above all expensive. However, it is necessary to ever be able to restart the machines and resume production. With your support, this will be possible.

For twelve long years, we have made every effort to build for you a reliable, trustworthy brand with the highest quality products. We believe that we have managed to gain your trust and you know that we will rebuild just as consistently after this tragedy. However, today, when we have lost everything, we ask for your support.

The biggest fight is ahead of us, we believe that our #MancraftTeam will help us win it.

(Källa: https://zrzutka.pl/g65w97)

M.A.S.S. MK1 går att förbokas nu och Mancraft har lanserat ljudförstärkaren Mjolnir

dsc_0041

Tillverkaren Mancraft i Polen har skickat in information om att axelstödet M.A.S.S. MK1 (Mancraft Air Stock Support) med plats för gastub (se tidigare nyhet) nu är tillgänglig för förhandsbeställningar.

De informerar också om att deras ljudförstärkare ”Mjolnir Amplifier” finns tillgänglig. Det går att ändra ljudstyrkan genom att justera en grej inuti och produkten finns i flera olika färger.

I Sverige är det framför allt butiken PM Airsoft som saluför produkter från Mancraft och M.A.S.S. MK1 finns redan tillagd i deras webshop för förbeställningar, se Airsoft.nu Produktsök.

Hello :),

New M.A.S.S. available at preorder, pics attached, info in links:
www.facebook.com/mancraftpl
http://shop-mancraft.com/en/mass/99-mass-mk1.html
ALSO!

We have quite pretty Mjolnir Amplifiers with adjustable sound here as well!
check them out:
http://shop-mancraft.com/en/glowna/106-mancraft-mjolnir-amplifier.html

Läs fortsättningen »

M.A.S.S. MK1 – Mancraft Air Stock Support MK1

DSC_0489

Tillverkaren Mancraft i Polen med inriktning på HPA-produkter har skickat in information om att de håller på att utveckla axelstödet M.A.S.S. MK1 (Mancraft Air Stock Support MK1).

So there it is: M.A.S.S. MK1 – Mancraft Air Stock Support MK1 :D.

It can accommodate 13ci (0,21l) HP tank and regulator (Mancraft regulators fits, Wolverine reg will fit as well, Redline, nijna – the same thing – they all should fit and not be visible too much. At the back you have hole to put small manometer.

It will be anodized black, hard anodization.

Stock itself working also like Tournament lock.

So, what’s the price? Something around 150-160usd. It will be comming with connectors for HP tank and an regulator.

That’s the last prototype on photos. There will be few small changes and in monday it’s going for production.
So, what’s your thoughts? 😉

Yep, we’re also prototyping some 3D pads for it.

Itself it weights around 400g (0,4kg / 0,9lb)

SDiK och lanyard från HPA-tillverkaren Mancraft

DSC_0261

Tillverkaren Mancraft i Polen som inriktar sig på HPA-produkter har skickat in information om deras Sniper drop-in-kit (SDiK) för flera olika prickskyttegevär (och även Silverback SRS) och sedan deras lanyard för HPA-pistoler.

Hello,
Mancraft SDiK brouche, also some news abut matching the Silverback SRS at: https://www.facebook.com/mancraftpl/
Also: Pistol Lanyard, see attached photos.

Mer information om produkterna finns på shop-mancraft.com

Läs fortsättningen »