![\"XTC](\"https:\/\/www.airsoft.nu\/nyheter\/files\/2016\/07\/XTC-hop-up-spring-1.jpg\")
<\/p>\n<\/p>\n
Tillverkaren Modify i Taiwan har skickat in information g\u00e4llande fj\u00e4dern vid hopup-huset och hur de l\u00f6st det hos deras airsoftvapen XTC-G1.<\/strong><\/p>\n You might like to know we used a tapered hop up spring for XTC-G1. We thought that a tapered hop up spring, though small, accomplishes big as it is better for line up and air seal. So I wrote this article,\u00a0What causes AEGs low FPS issue? <\/b>Attached are the article and the pictures.<\/p>\n Artikeln i sin helhet:<\/p>\n What causes AEGs low FPS issue?<\/strong><\/p>\n There are lots of variables causing AEGs low FPS issue. The air seal is a key point. The hop up spring, though small, accomplishes big as it can pushes the hop up chamber back into the air nozzle to reach a good air seal. When the hop up spring is not strong enough or too short, or you lost it when you rebuild your AEGs, the hop up unit would moves back and forth, so it doesn\u2019t always line up with the magazine, with the hop up moving it may cause loss of air seal, causing lower muzzle velocity.<\/p>\n The Modify XTC\u2010G1 is used with a tapered spring for the hop up, which puts tension against the hop up and air nozzle to eliminate any play\/ wobble that may affect accuracy. It allows the hop up unit together with the inner barrel always line up with the magazine and gearbox, and further reach a good air seal. But be aware of its installing direction. If we install the spring the wrong way, the hop up unit would moves back and forth a little bit, so it couldn\u2019t reach its purpose<\/p><\/blockquote>\n PDF:\u00a0<\/strong>Tapered Spring of Hop Up Chamber<\/a><\/p>\n\r\n\t\t