Airsoft.nu – Nyheter

Tillverkaren Modify i Taiwan lanserade nyligen sitt airsoftgevär XTC-G1 (AEG) och snart kommer den kortare versionen som heter XTC CQB. XTC CQB förväntas lanseras i maj.

Bland annat har airsoftvapen från XTC-serien ambidextriös eldväljare som bara behöver vridas 45-grader (mellan semi och fullauto) och justerbar utgångshastighet via en lång insexnyckel.

Tillverkaren Modify i Taiwan deltog nyligen på airsoftmässan Black Hole Show  i Japan och visade upp det kommande airsoftvapnet XTC-G1 och lät även besökare testskjuta.

Tyvärr är videons bildkvalitet inte den bästa och här följer information som Modify har skickat in;

We attended the Black Hole Show in Japan from Jan. 9 through Jan. 11, and displayed our new XTC-G1 AEGs there. The airsoft players were welcome to try the speed shooting competition with Modify XTC-G1. Here is the Youtube link: https://www.youtube.com/watch?v=S9cenn6FLBU&feature=youtu.be

Tillverkaren i Modify i Taiwan kommer inom kort att lansera sitt airsoftvapen XTC-G1 och har därför skickat in en del förhandsinformation, men tackar även för det snart gångna året.

Dear Friends,

Merry Christmas! It has been a very substantial 2015 to say the least. We appreciate you for your all support of Modify-Tech in 2015.

Some of you might like to know that we are going to release AEG-XTC-G1. I would like to let you know the masterpieces more details.
Here is the details of AEG…XTC-G1.
1. Getting more popular firearms application: standard 1913 Picatinny rail, T6065 high grade Aluminum Key-Mod handguard rail, CNC machined 14.5” outer barrel. Beside of these popular application, we also design “3-Point Fixed Ring and Double Nuts”. The fixed ring and double nut to fix the outer barrel. Even you drop it incidentally, it will be stable.

2. The next is billet style upper and lower receiver. It is equipped with steel straight trigger and 45° Ambi-Safety Selector. We also redesigned internal of grip and for better holding.

3. The most important of AEG is the internals of gearbox. We use CNC machined Steel Gear Set and 8mm Ceramic ball bearing in the spur gear specially. As for other upgrade parts, it is equipped with 7 Metal Teeth High Speed/ Torque Ultra Piston and Aircraft Aluminum piston head, cylinder, cylinder head.

4. The accurate hop up system combine with 6.1mm extreme straight inner barrel.

5. The last part…6 positions Adjustable Crane Stock. It equipped with Slide-Conductive Rail System. It has no more problems on wire-jammed. Triple-place for battery setting. You have more selection for batteries. If you have restriction of FPS in the battlefield today, you can adjust the FPS or change spring quickly by long hexagonal key. You do not disassembly the receiver, even the gearbox.
Our R&D departments have done countless times to test XTC-G1. I would like to let you know that the XTC-G1 has passed 6,000rds persistent testing, and it totally passed 20,000rds testing, all the parts are still in good condition. Please forward to our testing video!

Thank you very much. Wish you have a wonderful holidays and Happy New Year!

Tillverkaren Modify i Taiwan har skickat in information om deras kommande tracer-magasin i produktserien XTC.

A little story of beehive magazine plate: we found that the wild bee nested around the office many times during the development phase. Even though we called the fireman to take off, the wild bee still came back to nest. We had a sudden whim to make some products to “Bhive”. That is why we have this design.

We are going to release the 150rds Bhive tracer magazine. If you are early adopter, maybe you can try 150 Bhive tracer mag. The Bhive 150rds mid-caps continue with some of features of XTC magazines.
l The rib allows you can DIY a little bit to fit the magazine funnel perfectly.

l Bhive magazine plate for smoother, faster magazine reloading and handling.

Here is the tracer test: https://www.youtube.com/watch?v=LQslutgB784

Tillverkaren Modify i Taiwan har skickat in information om deras kommande produkt XTC-G1 och den tvåsidiga eldväljaren som bara går att vrida 45 grader.

Yes, we have the new video this week. You might like to that XTC-G1 is loaded 45-degree ambi safety selector. But do you how smooth operation of it? Let’s check it out.
Here is the link: https://www.youtube.com/watch?v=NM681MEMZow

Läs fortsättningen »

Tillverkaren Modify i Taiwan har skickat in information om deras senaste produkt ”Beehive Magazine Plate” som är ett handtag (motsvarande magpul) som passar deras nya M4-magasin (se tidigare nyhet). Oklart om produkten kommer heta ”Beehive Magazine Plate” eller inte men delen som ska fästas på magasinet har ett bikupemönster precis som en del andra produkter i Modifys XTC-serie.

If you are bored with old fashion magazine plate, how about this? A new Beehive Magazine Plate for speed reloading has begun. Like a hard-working bee, work hard, play hard.
If you want to know more and the latest news about new products, like our fans page and follow us. You could receive the latest news and video.

Tillverkaren Modify i Taiwan har skickat in information om deras nya produkt ”Innovative Anti-Reversal Latch”.

If you have the following problems, you should change your Anti-Reversal Latch.

1. You lost the spring of the anti-reversal latch when you install your gearbox parts.
2. You hurt or nearly hurt by the unreleased AEG spring when you open your gearbox.
3. You damaged the anti-reversal latch spring, which causing damage to the other internal parts.

Modify Innovative Anti-Reversal Latch

• Special E-Ring prevents loss of the spring.
• I-Shaped Groove on shaft allows AEGs spring release before opening gearbox.
• Add a pin to support the spring directly and friendly.

The original design of the Anti-Reversal Latch spring is the circle part on the spring goes around the smaller axle on the latch, and the funky little part on the end of the spring goes up and hooks around the triangle shaped part sticking out from the axle. With it, the latch would have tension to latch onto the bevel stops to stop the gears from backspin. However, owing to the fast movement of the anti-reversal latch, about 20~50 cycles per second, the original design of the spring would result it in a flexible fatigue, and would damage around the hook easily. The little pieces of spring would be moved in the running gearbox and might cause damage to the other internal parts.

A small part gets the job done. Don’t make it loss too easy. That’s why we make the new design, Modify Anti-Reversal Latch. Add a pin to support the spring directly and friendly. Avoid the spring damage around the hook.

Tillverkaren Modify i Taiwan har skickat in information om att de har lanserat magasinen XTC 190rds Mid-Cap för M16/M4-varianter.

Baksidan har en klack som kan slipas ner för att passa så bra som möjligt i sitt airsoftvapens magasinbrunn.

Detta är en produkt i Modifys XTC-serie och framöver kommer de lansera flera airsoftvapen.

I would like to let you know that we released the XTC 190rds Mid-Cap Magazine for M16/M4 series AEGs recently. It offers you strong back up in the field. We choose light weight enhanced polymer to produce the magazine and use high efficiency compression spring. Above all, precision feeding what counts in the field. So find your local dealer or distributor to try XTC 190rds Mid-Cap Magazine!

Further, the XTC 190rds mid-caps fit most brand M16/M4 series AEGs in the market. However, as you might like to know there has tolerance between different brands. In order to apply to various brand M16/M4 series AEG, we made a rib on the magazine to allow you can DIY a little bit to fit the magazine funnel of your AEG perfectly.

I skrivande stund har bara WGC Shop lagt in produkten i sitt sortiment enligt Airsoftdb.

Läs fortsättningen »

Tillverkaren Modify från Taiwan visade upp prototypen av deras kommande airsoftvapen XTC (Xtreme Tactical Carbine) i sin monter på IWA 2015.

Modify har tidigare främst inriktat sig på reservdelar och tillbehör så XTC (AEG) blir deras andra airsoftvapen efter den fjäderdrivna snipern MOD24 som lanserades för några år sedan.

Hanna från Modify demonstrerar XTC. Kolla in videon ovan för mer information.

Läs fortsättningen »

Tillverkaren Modify visade upp sin airsoftsniper MOD24, magasin som lyser upp kulorna (spårljus/tracer) och eftersom de inte bara håller på med airsoft så visade de även ett skruvstäd lämpligt bland annat för vapenmek.

Airsoftsnipern MOD24 (M24) är fjäderdriven (bolt-action) och finns i färgerna TAN, OD och Svart.

Magasinet för tracer-kulor.

Skruvstädet 3-jaw universal vise gör att tex sitt vapen kan spännas fast men utan att bli repat.

Jonas från butiken JBB Guns diskuterar Modifys produkter då butiken är en av de i Sverige som säljer deras produkter.